Price: $35.99
(as of Mar 09, 2026 05:41:18 UTC – Details)
Product description
NOVA3D High Toughness Washable Mecha Resin
NOVA3D Washable Mecha Resin
Easy to Post-Process
Low viscosity and high fluidity facilitate cleanability and accommodate different cleaning methods like water, washing machine, and ultrasonic.
Perfect Precision Details
The cleaned model has a non-sticky surface, and the support is easier to remove, making post-processing less challenging.
High Precision Minimal Shrinkage
With a low shrinkage rate, the risk of distortion and deformation is reduced, resulting in high molding accuracy and detailed models
Detailed Parameters Tensile Modulus: 390-410Mpa Flexura1 Modulus: 400-430Mpa Heat Distortion Temperature: 70-80℃ Notched Impact Strength:42-50j/m Viscosity: 180Mpa.s Density: 1.03-1.14g/cm Tensile Strength: 45Mpa Shore Hardness: 80-84D
Excellent Toughness Durability
Excellent performance with perfect details
With high toughness and strength, it is suitable for printing structural parts, tools and other required models. High performance. The printed model is suitable for drilling and tapping.
Product specifications
Viscosity 180Mpa·s Absorption band 395-405nm Density 1.03-1.14g/cm3 Tensile strength 45Mpa Bending strength 51Mpa Display hardness 80-84D Volume shrinkage 3.5-4.3% Stretch model 390-410Mpa Gap impact strength 42-50j/m Heat distortion temperature 70-80℃
F&Q
Q:How to set printing parameters?
A:Layer thickness 0.04mm，Initial number of layers 3，Exposure time 2.2 seconds，Initial layer exposure time 40s
Q:Do you notice more frequent cracking and streaking on the lamination lines compared to other water-washed resins?
A:In actual testing, this phenomenon did not occur even if the model was left for half a year.
Q:Is secondary curing required? Can I print hollow models using washable mechanical resin?
A:Is required. It is not recommended to use washable mecha resin to print hollow models, because the inside is not hardened and is prone to cracking and deformation. If you print a hollow model with small holes, the resin will not flow out and will be sealed in the cavity.
Q:Is it easy to remove from support?
A:It is easy to remove.
【Water Washable and Easy to Clean Resin】 NOVA3D water washable resin contains hydrophilic groups and has good water solubility. It can be cleaned directly with water instead of alcohol, greatly saving the cost of using alcohol. Cleaned models have a non-stick surface and supports are easier to move, making post-processing less challenging.
High Precision, Matte Texture 1000ml Resin】Made of washable resin, no need to use IPA to clean, environmentally friendly! It’s very easy to use. Not easy to break, has good precision, and is non-stick. Additionally, the wonderful matte texture makes the prints look less plastic, giving them a more premium aesthetic, with an excellent surface finish and fine detail.
【Toughness and Impact Resistance Resin】Water washed mecha resin has high toughness and strength, will not break even if the screws are tightened, and is resistant to warping and easy to cut. Designed to withstand bending, bending, and compression. It also has excellent impact and break resistance.
【2.5% Low Shrinkage & 3D Printing Resin】Due to the low shrinkage, the model will not be seriously deformed or cracked even after long-term use. No need to worry about print debris when drilling.You can print any craft models and tool models, as well as game models, etc.
【Low Odor & Resin Model AS A Gift 】Due to the combination of imported raw materials and NOVA3D’s unique ingredients, there is almost no smell when printing compared to ordinary resin, so you can print safely indoors.The printed model painting it after can be as a gift given to the everyone you want to give it to.